Kristian Godoy

Biographical Info:

Launch to JIC Fittings

Introduction:

JIC Fitting is a selection of hydraulic fittings which is made in accordance to the SAE J514 requirements. The acronym JIC stands for Joint Industry Council. It's likewise known as the JIC thirty seven degrees flare fitting since it's a 37 degrees flare seating surface. These fittings are used on oil hydraulic systems in a lot of fields (fuel delivery, fuel power program, shipbuilding, mobile hydraulic tools, etc...). A JIC fitting structure has three components that make a tubing assembly: fitting, flare nut, and sleeve.

Material:

Materials used to fabricate JIC fittings include carbon steel and stainless SS316L.

(image: http://www.imageafter.com/image.php?image=b19objects_signs027.jpg&dl=1)Sizes:

JIC body and flare nut are available in outer diameter ("OD) sizes between 1/8" to one 2". Sleeve has two distinct reading measurements, metric size (mm) and inch exterior diameter ("OD). Sleeve size can be purchased from 3mm to 50mm as well as 1/8" to 2". Fitting sizes are specified by the corresponding outside diameter of the tubing for the numerous kinds of tube ends.

Functioning Pressure:

The typical working stress of the fittings ranges from thousand to 5000 psi for several sizes and contacts. The minimum burst stress is four times the working strain. The JIC fittings must be able to withstand twice the working strain for a period of 1 minute without leakage or failure.

Remember to take note that the pressure rating of a same fitting might vary when it is connected to different equipments.. For example, if a fitting with a low performing pressure is linked to a pipe, it is going to result in an overall even reduce functioning pressure. In all cases, constantly think about the lowest pressure as the optimum working pressure of the product.

So how to lose lose weight fast without exercise (click through the following web site) does a JIC fitting works: For tube connections, the assembly procedure starts from the planning of the tube. First, the nut as well as sleeve are inserted onto the end of a tube. With the usage of a flaring tool, form the conclusion of the hose to thirty seven degrees. Next, firm up the nut by using a spanner till the nut is firm and the sleeve grips upon the tube. In case the fittings are bench assembled, the gripping measures may be determined by revolving the hose manually as the nut is drawn down. When the tube will not anymore be rotated by hand, the sleeve has gripped upon the tube. Once this happens,, firm up the nut by turning it one full turn. This might vary somewhat with some other tubing materials, but for common practice, it's a very good rule to adhere to.

Configurations of JIC Fitting: Commonly utilized connection sorts be made up of: JIC/BSPP Male Connector, JIC/ NPT Male connector, JIC union, JIC/NPT Swivel Male Connector, JIC/BSPP Swivel Male Connector.

Brand of JIC Fittings:

HS Corporation is a Korean manufacturer specializing in JIC Fitting. Established in 1980, HS Corporation has over 30 years of specialised expertise in producing fittings.